Violin Forum/Message Board Forum Index Violin Forum/Message Board
Provided by Violin Vision
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

has anyone attempted violin bows with laminated wood?

 
Post new topic   Reply to topic    Violin Forum/Message Board Forum Index -> Bow Making Forum
View previous topic :: View next topic  
Author Message
DavidFord
Junior Member


Joined: 07 Aug 2018
Posts: 6

PostPosted: Fri Aug 31, 2018 11:43 pm    Post subject: has anyone attempted violin bows with laminated wood? Reply with quote

Just an idle question. Just wondering, with the scarcity of pernambuco, if anyone has tried to replicate its features by laminating different types of wood together.

Something for strength, something for transmission of sound, etc.

I have no idea what woods should be used. Just blue skying a question. I am not a luthier.
_________________
No cats were killed in the making of this music.
Back to top
View user's profile Send private message
Nipi2
Junior Member


Joined: 19 Jan 2015
Posts: 14
Location: Greece

PostPosted: Thu Sep 06, 2018 8:54 am    Post subject: Reply with quote

Different wood spieces have very good results. Woods like IPE, massaradumba etc. Also carbon bows have succes. There are many experimens on different woods and materials. The "resourses" section has articles on such kind of woods.
Back to top
View user's profile Send private message Send e-mail
Mat Roop
Senior Member


Joined: 24 Mar 2007
Posts: 911
Location: Wyoming Ontario

PostPosted: Mon Sep 10, 2018 7:08 pm    Post subject: Reply with quote

Not a luthier? ... Perhaps an archetier? ... If not, time to become one!
Cheers, Mat
Back to top
View user's profile Send private message Send e-mail Visit poster's website
John Cadd
Super Member


Joined: 23 Jul 2009
Posts: 819
Location: Hoylake

PostPosted: Sat Jun 17, 2023 7:49 am    Post subject: Laminated wood Reply with quote

There is a huge gap here that should be filled. I think snake wood was used for laminated bows. It must be the most technically difficult way to make a bow. The stick is constructed with six parts fitted and glued together . It`s hard to put it into words .Each strip has 2 planed joining surfaces plus the outer surface .The angles are 180 divided by 6.So 30 degree bevels all along each element . 6 elements glued together . How they made the tip is anyones guess .The thicker end at the frog is much simpler . I would keep the bevel effect as far as possible . If you can make one of those you can really boast about it . Even if it does not work that well . It would be a thing of beauty .
Making the stick straight and then bending may be the way .But heating all that work and the risk must be enormous . Maybe make it dry and perfectly straight and then apply the glue. Bind and clamp it in the curve with tight bindings until the glue has set. Any votes for araldite or superglue ? Slow araldite sets harder .Superglue would be a nightmare . Maybe pernambuco has made us all too lazy to find another way .
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Violin Forum/Message Board Forum Index -> Bow Making Forum All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group