View previous topic :: View next topic |
Author |
Message |
mapleleaf_gal Member
Joined: 24 Mar 2007 Posts: 73 Location: tucson, az
|
Posted: Mon Mar 26, 2007 3:55 pm Post subject: |
|
|
michael
i never had glue grow bacteria until i moved to the seattle area. i actually found spots of mold on my glue that i had left sitting around for a few weeks. i normally store my baby food jar of glue in the fridge if i am going to reuse it, but for some reason, i just left this jar sitting out. it was quite a sight!
i have always warmed the joint with a blow dryer as well before gluing it. but that is just what i was trained to do in school. so, i didnt really know any better. |
|
Back to top |
|
|
Jack H. Super Member
Joined: 24 Mar 2007 Posts: 346 Location: Israel
|
Posted: Wed Mar 28, 2007 2:22 pm Post subject: |
|
|
WHen working on basses we need to use a paint stripping gun.
we use it on setting #2, no more. Setting 7 is for lighting the bbq!
On a glue note, my Master just got back from Paris, he picked up a bunch of Resins, some very nice hand made rasps and some glue. it is a mix of Rabbit, Bone and hyde glues, it is VERY clean. It is so clean it is beautiful, like a Golden varnish in the pot. so clear also. I have never seen anything like this. Will try to remember the name tomorrow. |
|
Back to top |
|
|
sdantonio Member
Joined: 09 Apr 2007 Posts: 35 Location: Bellingham, Massachusetts, USA
|
Posted: Mon Apr 09, 2007 11:19 am Post subject: |
|
|
An excellent writeup. One thing that I would add. I tend to make up my hide glue in rather large batches. I chill in till it gels and then cut it up into small cubes. I then freeze the cubes and take one out when I need it.
I have never had a batch spoil from freezing, and it's a bit better than leaving it out on the benchtop between uses.
Just make sure the wife knows they arent regular ice cubes. |
|
Back to top |
|
|
mikemolnar Member
Joined: 30 Mar 2007 Posts: 57
|
Posted: Sat May 05, 2007 4:57 pm Post subject: Preparation of Hide Glue |
|
|
I like to prepare my glue daily.
I take a small Pyrex beaker into which I put a couple of teaspoonfuls of Behlens Hide Glue. Then I cover this with water and place the beaker in the hide glue pot. When the water is adsorbed by the glue granules, I add more water just to cover the coagulated mass.
The glue at this point is the thickest I would use.
If I need less thick glue, I add another equal amount.
Experience counts. I suggest err on the thick side. |
|
Back to top |
|
|
violinarius Member
Joined: 14 Dec 2007 Posts: 171
|
Posted: Sat Dec 15, 2007 4:29 am Post subject: |
|
|
Hello everyone.
I have been lurking for a while, and finally have decided to come out and post.
My background is varied, but I have been woodworking for over 3 decades.
I am trying to build my first violin right now, and I find this to be very challenging. I appreciate everyones help!!!
---------------------------------------------------------------------------------------
One thing that the water in the glue pot does is keep the temperature more constant, since the electrical on/off units are either full on or full off. The water has a great heat capacity, so it can store a great deal of energy, and then slowly release it back, so the pot is not going on and then off every few seconds. |
|
Back to top |
|
|
monradon Junior Member
Joined: 28 May 2007 Posts: 3 Location: South Dakota
|
Posted: Wed Feb 06, 2008 1:07 pm Post subject: Please Put this in word or pdf format |
|
|
Put this in a format that people can download from you I would even pay . You explained a bunch of stuff to me and it is very valuable info . I have not started to put together my hot glue stuff yet. _________________ Hobbit |
|
Back to top |
|
|
winxart Junior Member
Joined: 30 Jun 2008 Posts: 7
|
Posted: Mon Jun 30, 2008 4:27 pm Post subject: |
|
|
Is there any particular treatment for preparing glue being suitable to put together parts which will be able to be disassembled in the future as top plates for example?
Concentration,quality of the glue ,water dilution...? |
|
Back to top |
|
|
John Cadd Super Member
Joined: 23 Jul 2009 Posts: 843 Location: Hoylake
|
Posted: Fri Jul 31, 2009 2:52 pm Post subject: preparation of hide glue |
|
|
I have an electric gluepot which came with a metal inner pot that I never use.The glue would dry on the metal surface around the edge.
As a replacement I used an old mug minus handle.The top is wider and tapers in gradually which fits into a home made aluminium surround.There is a plastic lid made from a top of a dry milk carton.This stops water vapour being lost and the glue never gets a skin on top.Otherwise I follow the other excellent advice here. |
|
Back to top |
|
|
John Cadd Super Member
Joined: 23 Jul 2009 Posts: 843 Location: Hoylake
|
Posted: Fri Sep 18, 2009 12:43 pm Post subject: |
|
|
Has anybody mentioned the best dilution to use?I mean the way it either drips or runs when at the right temperature.I seem to have a notion that it needs to be just on the runny side.Too thick and it would drip.We`re down to ultimate skill here.(Just said that to give you a smile.) |
|
Back to top |
|
|
Mat Roop Senior Member
Joined: 24 Mar 2007 Posts: 911 Location: Wyoming Ontario
|
Posted: Sat Sep 26, 2009 12:36 am Post subject: |
|
|
Consistency of warm honey is about right... but then it depends on what part you are gluing... Cheers, Mat |
|
Back to top |
|
|
famuswood Member
Joined: 28 Sep 2009 Posts: 75 Location: Smyrna, TN
|
Posted: Sun Nov 29, 2009 9:12 pm Post subject: |
|
|
I'm curious about how long is long enough to keep hide glue clamped - specifically clamping plates. I'm leaving mine clamped overnight but is there a minimal time for clamping hide glue? |
|
Back to top |
|
|
Jack Rushing Member
Joined: 23 Mar 2007 Posts: 170
|
Posted: Mon Nov 30, 2009 9:41 pm Post subject: |
|
|
Don't know about the rest, but I leave mine clamped overnight. |
|
Back to top |
|
|
Mat Roop Senior Member
Joined: 24 Mar 2007 Posts: 911 Location: Wyoming Ontario
|
Posted: Sun Dec 06, 2009 11:34 pm Post subject: |
|
|
24 hrs for me... Mat |
|
Back to top |
|
|
John Cadd Super Member
Joined: 23 Jul 2009 Posts: 843 Location: Hoylake
|
Posted: Mon Jan 11, 2010 7:29 am Post subject: |
|
|
Gluing and leaving overnight. Relief that potential hazards are overcome .Hope that it all went well and put in a safe place like a baby in a cot. That explains the (almost) best part of violin making next morning when you come to release the new creation from the forest of clamps. A precious moment. |
|
Back to top |
|
|
polkat Member
Joined: 16 Aug 2012 Posts: 32
|
Posted: Fri Nov 30, 2012 12:31 am Post subject: |
|
|
Fiddlegem mentioned earlier that his 'pot' kept the glue at a consistent 165 degrees. I'm wondering if 165 might be a little hot for hide glue? I usually go about 145, and have found (it seems) that higher temps tend to slightly weaken the glue. But I can't prove that!
I find that if the glue is well mixed and at a good temp, and the joints are well fitted and quite clean (and who would want anything else?) in a warm room I can pull the clamps in about 8~10 hours. Sounds short I know, but I've never had a failure! |
|
Back to top |
|
|
|