View previous topic :: View next topic |
Author |
Message |
Jesfiddle Junior Member
Joined: 03 Feb 2008 Posts: 1
|
Posted: Mon Feb 11, 2008 6:44 pm Post subject: How do you store your violins? |
|
|
Has anyone here made a good rack system for storing/hanging fiddles that don't have cases?
Jes |
|
Back to top |
|
|
FiddleDoug Member
Joined: 08 Sep 2007 Posts: 227 Location: Hilton, NY
|
Posted: Mon Feb 11, 2008 9:56 pm Post subject: Violin Cabinet |
|
|
I store a few of my instruments in a cabinet that I built. You can see pictures of it on my website. It will store up to 12 violins in two rows of 6. I can also hang about 8 bows on the sides of the cabinet. The hangers that fiddles hang on are made of 1/8 inch brass brazing rod. I also have a hygrometer and humidifier in the cabinet so that I can monitor and control the humidity during the heating season. _________________ Doug Wall
www.wallindependent.com |
|
Back to top |
|
|
Jeffrey Holmes Member
Joined: 03 Apr 2007 Posts: 90 Location: Ann Arbor
|
Posted: Tue Feb 12, 2008 12:13 am Post subject: |
|
|
Storage is a challenge...
I keep my shop temp. and humidity very constant, and usually hang a number of instruments on the rack shown in the left corner of this photo:
The rack is a cherry frame with brass rods.
On the other side of the shop, I also have cases in an open shelved cart as well as cases in wall cabinets. In the safe, I use a cubby system. _________________ Jeffrey
http://holmesviolins.com |
|
Back to top |
|
|
mapleleaf_gal Member
Joined: 24 Mar 2007 Posts: 73 Location: tucson, az
|
Posted: Tue Feb 12, 2008 1:57 am Post subject: |
|
|
Jeffrey Holmes wrote: | Storage is a challenge...
I keep my shop temp. and humidity very constant, and usually hang a number of instruments on the rack shown in the left corner of this photo:
The rack is a cherry frame with brass rods.
On the other side of the shop, I also have cases in an open shelved cart as well as cases in wall cabinets. In the safe, I use a cubby system. |
how in the heck do you keep your shop space so clean??!!
i see you are a CSVM graduate. when did you graduate? _________________ http://sgwhiteviolins.googlepages.com/home |
|
Back to top |
|
|
Jeffrey Holmes Member
Joined: 03 Apr 2007 Posts: 90 Location: Ann Arbor
|
Posted: Tue Feb 12, 2008 2:10 am Post subject: |
|
|
mapleleaf_gal wrote: |
how in the heck do you keep your shop space so clean??!!
i see you are a CSVM graduate. when did you graduate? |
Can't seem to get anything done unless the shop is clean. Most of my time is spent restoring, which I find goes much more smoothly if all is in order.
Yes, I am a CSVM graduate. Started when the school was called the "The Kenneth Warren School of Violin Making" and the setting was on Jackson in downtown Chicago. Finished in '85, after the school took on the new name and moved to the NW side. Since then, it moved to the present building in Skokie and (as you probably know) went non-profit. I presently serve on the school's board of directors.
Here's the other side (just so you know I don't shove the mess around to take photos) There's a separate machine room, which helps keep the dust down.
_________________ Jeffrey
http://holmesviolins.com |
|
Back to top |
|
|
Jack H. Super Member
Joined: 24 Mar 2007 Posts: 346 Location: Israel
|
Posted: Tue Feb 12, 2008 2:47 pm Post subject: |
|
|
Jeffrey Holmes wrote: | Storage is a challenge...
I keep my shop temp. and humidity very constant, and usually hang a number of instruments on the rack shown in the left corner of this photo:
The rack is a cherry frame with brass rods.
On the other side of the shop, I also have cases in an open shelved cart as well as cases in wall cabinets. In the safe, I use a cubby system. |
Nice work space Jeffery!
Can't wait to get mine in shape, too much moving around recently...
J H |
|
Back to top |
|
|
mapleleaf_gal Member
Joined: 24 Mar 2007 Posts: 73 Location: tucson, az
|
Posted: Tue Feb 12, 2008 4:34 pm Post subject: |
|
|
[quote="Jeffrey Holmes"][quote="mapleleaf_gal"]
how in the heck do you keep your shop space so clean??!!
amazing. i am a neat and orderly person, but there is no way i could work in a shop that clean!! even the HOSPITAL pharmacy i work in is NOT that clean!
i graduted in '02 just before they went non profit. i think i read on your webpage that you worked for shar. that company is a lot like southwest strings, i think. i moved up here to seattle a few years ago, but there are very few shops but they are all down in the city. they also do not need any help or want anyone hanging around. so, i have done very little with my making/repairing in the last few years. just done making in my workshop in my house. but am getting ready to move to tucson, az this summer. soutwest strings is there. i have been toying with the idea of trying to get a job there. do you know anything about working for them? or know anyone who does? any feedback at all? this is just a back up plan if i can not get a job in a hospital pharmacy. (going to try to get into pharmacy school at the U of A but have some pre reqs to finish up before i can apply) _________________ http://sgwhiteviolins.googlepages.com/home |
|
Back to top |
|
|
Jeffrey Holmes Member
Joined: 03 Apr 2007 Posts: 90 Location: Ann Arbor
|
Posted: Tue Feb 12, 2008 5:28 pm Post subject: |
|
|
mapleleaf_gal wrote: | amazing. i am a neat and orderly person, but there is no way i could work in a shop that clean!! even the HOSPITAL pharmacy i work in is NOT that clean! |
In addition to my own (maybe manic) need to have things in their respective places (so I can find them), I tend to work on higher end instruments. The owners seem much more comfortable when they see that some serious care is being taken... and I'm much less nervous when I have a solid feeling that I've not laid down my straight edge on the Amati's top.
Touchup goes on much better when there's no dust in it too!
mapleleaf_gal wrote: |
i think i read on your webpage that you worked for shar. that company is a lot like southwest strings, i think. |
Yes, I worked for Shar 17 years... came there to work with David Burgess. I think the comparison to Southwest Strings is pretty accurate at this point. Ten or twenty years ago, Shar was a very different place, though. I was VP of the Fine Instrument Division there... and we had a pretty impressive inventory and a number of fine restorers then... and a shop in Toronto as well.
Quote: | i moved up here to seattle a few years ago, but there are very few shops but they are all down in the city. they also do not need any help or want anyone hanging around. so, i have done very little with my making/repairing in the last few years. just done making in my workshop in my house. but am getting ready to move to tucson, az this summer. soutwest strings is there. i have been toying with the idea of trying to get a job there. do you know anything about working for them? or know anyone who does? any feedback at all? this is just a back up plan if i can not get a job in a hospital pharmacy. (going to try to get into pharmacy school at the U of A but have some pre reqs to finish up before i can apply) |
Don't know much about working for the Southwest company... but they do seem to be expanding in a number of areas. If the management is flexible, maybe it could be a decent place to hang your hat for a while.
Jack; Do snap a few shots when you get your shop space the way you want it to be! _________________ Jeffrey
http://holmesviolins.com |
|
Back to top |
|
|
MLM Junior Member
Joined: 09 Dec 2007 Posts: 9 Location: Bend Oregon
|
Posted: Tue Feb 12, 2008 10:40 pm Post subject: |
|
|
I am soooo impressed with your shop!!! What a great example of
professionalism. That is by far the best I have ever seen and should
set a standard for all. Congratulatios. Your violins must reflect the same
standard of excellence. I know where to shop for my next violin.
MLM |
|
Back to top |
|
|
|